Search for: All records

The development of high-performance battery technologies necessitates ultrathin separators with superior mechanical strength and electrochemical properties. We present an innovative 1 µm thick, pinhole-free zeolitic imidazolate framework-8 (ZIF-8) layer, cathodically deposited on an 8 µm thick commercial polypropylene (PP) film in a rapid process, resulting in a ZIF-8@8-µm PP flexible membrane. This crack-free ZIF-8 layer, featuring angstrom-scale pores and chemical polar groups, functions as a Li+ sieve, regulating Li+ transport, controlling Li deposition, and blocking dissolved active cathode materials. It also enhances Li+ diffusion and transference number, extending the Sand’s time for Li dendrite formation. Consequently, the ZIF-8@8-µm PP separator addresses polysulfide shuttling in Li-S batteries and Li dendrite formation in Li-metal batteries, significantly improving their performance compared to conventional separators. Our findings indicate that while the 8-μm PP alone is unsuitable as a battery separator, the ZIF-8@8-μm PP, possesses the mechanical strength and electrochemical properties necessary for developing both Li-S and Li-metal batteries, as well as application in conventional Li-ion batteries with enhanced volumetric energy densities. 

Abstract Electrochemical capacitors (ECs) offer superior specific capacitance for energy storage compared to traditional electrolytic capacitors but face limitations in alternating current (AC) filtering due to the need for balancing fast response and high capacitance. This study addresses these challenges by developing a freestanding nanostructured carbon electrode, derived from the rapid carbonization of bacterial cellulose (BC) embedded with zeolitic imidazolate framework 8 (ZIF‐8) and in situ formed carbon nanotubes (CNTs). The electrode exhibits an exceptionally low area resistance of 9.8 mΩ cm²and a high specific capacitance of 2.1 mF cm⁻²at 120 Hz, maintaining performance even at high frequencies. Stacking these electrodes enhances the capacitance to 5.3 mF cm⁻², with the phase angle degrading to −74.4° at 120 Hz; however, they retain a phase angle below −45° up to ≈50 kHz, demonstrating excellent high‐frequency performance. Furthermore, connecting three aqueous units in series as an integrated cell or utilizing organic electrolytes extends the voltage window to 2.4 V, enhancing their suitability for high‐voltage applications. Ripple voltage analysis under various loads and frequencies indicates effective filtering capabilities, highlighting the potential of these nanostructured ECs for next‐generation electronic applications. 

Abstract An ultra‐fast electrochemical capacitor (EC) designed for efficient ripple current smoothing was fabricated using vertically oriented MoS₂(VOM) nanoflakes deposited on freestanding carbonized cellulose (CC) sheets as electrodes. The daily used cellulose tissue sheets were transformed into electrode scaffolds through a rapid pyrolysis process within a preheated furnace, on which VOM nanoflakes were formed in a conventional hydrothermal process. With these ~10 μm thick VOM‐CC electrodes, ultrafast ECs with tunable frequency response and specific capacitance density were fabricated. The ECs with a cell‐level areal capacitance density of 0.8 mF/cm²at 120 Hz were demonstrated for ripple current filtering from 60 Hz to 60 kHz. At a lower frequency response level, EC cell with a large capacitance density of 4.8 mF/cm²was also demonstrated. With the facile and easily scaled up process to producing the nanostructured electrode, the miniaturized VOM‐CC based ECs have the potential to substitute the bulky aluminum electrolytic capacitors for current smoothing and pulse power applications.